Denon Stereo Receiver Denon AVR-X4000 Integrated Network AV Receiver User Manual

0

Out of 0 Ratings

Owner's of the Denon Stereo Receiver Denon AVR-X4000 Integrated Network AV Receiver gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 275
 
224
Appendix
SettingsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Tips
2 The HDMI control function does not work
Symptom Cause/Solution Page
The HDMI control function does not
work.
•Check that “HDMI Control” in the menu is set to “On”.
•You cannot operate devices that are not compatible with the HDMI control function. In
addition, depending on the connected device or the settings, the HDMI control function may
not work. In this case, operate the external device directly.
•Check that the HDMI control function setting is enabled on all devices connected to this unit.
•When you make connection related changes such as connecting an additional HDMI device,
the link operation settings may be initialized. Turn o this unit and devices connected via
HDMI, and turn them on again.
•The HDMI MONITOR 2 connector is not compatible with the HDMI control function. Use the
HDMI MONITOR 1 connector to connect to the TV.
163
125
125
125
37
2 When using HDMI ZONE2, the devices does not function properly
Symptom Cause/Solution Page
When using MAIN ZONE, video
output is interrupted in HDMI ZONE2.
•With the same input source selected for MAIN ZONE and ZONE2, when you operate MAIN
ZONE, video may be interrupted in HDMI ZONE2.
–
When using HDMI ZONE2, no video
or audio is output from the TV in
ZONE2.
•Check that the power is on for ZONE2.
•Check the input source for ZONE2.
•The AUX 1-HDMI 7 connector on the front panel does not support the HDMI ZONE2 function.
•In ZONE2, playback is only possible when the input signals are HDMI signals.
•When the TV does not support the input audio format, audio is not output. Set the audio
format to “PCM” on the playback device. Alternatively, set “ZONE2 Setup” – “HDMI Audio”
in the menu to “PCM”.
•When the TV is not compatible with the resolution of the input video, no video is output. Set
the output resolution on the playback device to a resolution that is compatible with the TV.
138
138
–
–
194
–
When using HDMI ZONE2, MAIN
ZONE audio is played back as PCM.
•When the same input source is selected for MAIN ZONE and ZONE2, the audio format is
limited according to the specifications of the TV in ZONE2.
–

   Find Your Products By Category