0

Out of 0 Ratings

Owner's of the Onkyo Car Amplifier Power Amplifier gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 24
 
23
En
Specifications
Audio Inputs
Audio Outputs
Others
Specifications and features are subject to change without notice.
M-5000R
Amplifier Section
Rated Output Power
North American:
(Stereo) 80 watts minimum continuous power per
channel, 8 ohm loads, 2 channels driven from
20 Hz to 20 kHz, with a maximum total
harmonic distortion of 0.05% (FTC)
100 watts minimum continuous power per
channel, 8 ohm loads, 2 channels driven at
1 kHz, with a maximum total harmonic
distortion of 1% (FTC)
150 watts minimum continuous power per
channel, 4 ohm loads, 2 channels driven from
20 Hz to 20 kHz, with a maximum total
harmonic distortion of 0.05% (FTC)
170 watts minimum continuous power per
channel, 4 ohm loads, 2 channels driven at 1 kHz,
with a maximum total harmonic distortion of
1% (FTC)
(BTL mono) 180 watts minimum continuous power per
channel, 8 ohm loads, 1 channel driven from
20 Hz to 20 kHz, with a maximum total
harmonic distortion of 0.05% (FTC)
200 watts minimum continuous power per
channel, 8 ohm loads, 1 channel driven at 1 kHz,
with a maximum total harmonic distortion of
1% (FTC)
220 watts minimum continuous power per
channel, 6 ohm loads, 1 channel driven from
20 Hz to 20 kHz, with a maximum total
harmonic distortion of 0.05% (FTC)
250 watts minimum continuous power per
channel, 6 ohm loads, 1 channel driven at 1 kHz,
with a maximum total harmonic distortion of
1% (FTC)
European:
(Stereo)
2 ch × 80 W at 8 ohms, 20 Hz - 20 kHz, 0.05 %,
2 ch driven (IEC)
2 ch
× 150 W at 4 ohms, 20 Hz - 20 kHz, 0.05 %,
2 ch driven (IEC)
2 ch
× 100 W at 8 ohms, 1 kHz, 1 %, 2 ch driven
(IEC)
2 ch
× 170 W at 4 ohms, 1 kHz, 1 %, 2 ch driven
(IEC)
(BTL mono)
1ch × 180 W at 8 ohms, 20 Hz - 20 kHz, 0.05 %,
1 ch driven (IEC)
1ch
× 220 W at 6 ohms, 20 Hz - 20 kHz, 0.05 %,
1 ch driven (IEC)
1ch × 200 W at 8 ohms, 1 kHz, 1 %, 1 ch driven
(IEC)
1ch
× 250 W at 6 ohms, 1 kHz, 1 %, 1 ch driven
(IEC)
Dynamic Power
*
*
IEC60268-Short-term maximum output power
460 W (1 )
320 W (2 )
245 W (3 )
196 W (4 )
142 W (6 )
110 W (8 )
THD+N (Total Harmonic Distortion+Noise) 0.02 % (20 Hz - 20 kHz, half power)
0.005 % (1 kHz, half power)
Damping Factor 130 (1 kHz, 8 )
Input Sensitivity and Impedance (Unbalance) 700 mV/10 k (RCA)
Input Sensitivity and Impedance (Balance) 1.4 V/10 k (BTL)
Frequency Response 10 Hz - 100 kHz/+0 dB, –1 dB 1 W/8
1 Hz - 250 kHz/+0 dB, –3 dB 1 W/8
Signal to Noise Ratio 110 dB (RCA, IHF-A)
Speaker Impedance RCA Stereo: 4 - 16
XLR MONO: BTL 6 - 16
HICC 150 A
General Section
Power Supply North American: AC 120 V, 60 Hz
European: AC 230 V, 50 Hz
Power Consumption North American: 8.4 A
European: 280 W
Standby Power Consumption North American: 0.15 W
European: 0.2 W
Dimensions (W × H × D) 435 W × 187.5 H × 432.5 D mm
(17-1/8 W × 7-3/8 H × 17 D inches)
Weight 23.5 kg (51.8 lbs.)
Analog Stereo Inputs RCA IN-L, RCA IN-R
Balance Inputs XLR IN
Speaker Outputs Lch, Rch
12V Trigger In 1/Out 1